Boston Scientific Vercise Manual De Uso página 14

Physician Manual
Care must be taken to avoid damaging the DBS Lead with sharp instruments or
excessive force during surgery. The following guidelines will help to ensure the
longevity of components:
• Do not sharply bend or kink the DBS Lead or Extension.
• Do not tie suture(s) directly to the DBS Lead or Extension body.
• Avoid pulling an implanted DBS Lead taut; stress relief loops may help to
minimize tension on the DBS Lead.
• Avoid handling the DBS Lead with sharp instruments; use only rubber-tipped
forceps.
• Take care when using sharp instruments, such as hemostats or scalpels to
prevent damaging the DBS Lead.
Component Removal & Disposal. Any explanted components should be
returned to Boston Scientific. The Stimulator should be explanted in the case of
cremation and returned to Boston Scientific. Cremation may cause the Stimulator
battery to explode.
The Remote Control or Charging System should not be disposed of in fire, as these
components contain batteries which may explode causing injury when exposed
to fire. Used batteries should be disposed of in accordance with local laws and
regulations.
Cleaning the Charging Collar. Hand wash the Charging Collar with mild soap
and warm water. Do not machine wash the charging collar. Let the Charging Collar
air dry. Be sure to remove the Charger and Counterweight from the Charging Collar
before washing the Charging Collar.
Cleaning the Remote Control, Charger, Base Station, & Power Supply.
The components can be cleaned using alcohol or a mild detergent applied with a cloth
or tissue. Residue from soapy detergents should be removed with a damp cloth.
Do not use abrasive cleansers for cleaning. Do not clean the Charger, Base Station,
or Power Supply while they are directly or indirectly connected to a power outlet.
Physician Manual
91098825-07 Rev A 10 of 333