Ingeteam INGECON SUN 10TL Manual De Instalacion Y Uso página 121

DC connection
Connection via terminal (10 ~ 24 kW)
1. Uninstall the polycarbonate guard.
2. The unit has quick connectors. If you want to make a connection via a terminal, remove the protective
covers and install the supplied packing glands.
3. Pass a cable through each packing gland and guide it to the corresponding terminal. If the cable used has
a diameter of between 7 and 11.5 mm, use the reducer that comes with the packing gland. If the cable
has a diameter of between 11.5 and 17 mm, discard this reducer.
ABO2011IQM01_A - Installation and Operation Manual
Ingeteam
DE
EN
ES
FR
IT
PT
121