On / Off; The Kneading Machine; Kneading Machine Assembly And Operation - Profi Cook PC-KM 1004 Instrucciones De Servicio

Use the function buttons for the following standard
programmes:
Buttons Kneading
Machine
Kneading /
4 MIXING
mixing
EGG/ Mixing /
5
MILK
beating
FRUIT
6
JUICE
GRIND-
7
ING
• The electronic speed control prevents motor
overload. The rpm are automatically reduced in
case of overload.
CAUTION:
Do not use the appliance longer than 10 minutes
continuously. Let it first cool down for 10 minutes.

On / Off

With the control knob
• On: Turn the control knob clockwise to the
desired speed setting. The indicator lamp next
to ON lights up.
• Off: Turn the control knob counter-clockwise to
OFF position. The indicator lamp turns off.
With the function buttons
• On: Press the respective button once. The
indicator next to the selected button lights up.
• Off: Press the button again. The indicator lamp
turns off.
NOTE:
• The motor is equipped with a safety switch. It
switches the motor off if the arm (2) is swiv-
elled up. The respective indicator lamp shows
that the appliance is still ready to use.
• Lower the arm again; while the indicator lamp
is still lit the appliance continues the selected
function. The motor automatically starts briefly
up at a high speed setting.
Meat Blender
Grinder
Chopping /
mixing /
puree
Grinding
meat /
forming
dough
NOTE:
• Do not leave the arm more than 15 seconds in
upright position; otherwise the indicator lamp
turns off. After lowering the arm the appliance
stays in off mode. Switch the appliance on at
the control knob or press a function button to
continue operation.

The kneading machine

Kneading Machine Assembly And Operation

CAUTION:
• Never operate the lever (3) if the mixing con-
tainer is attached! The mixing container will tip
over.
• Never use the kneading machine with at-
tached mixing container!
• Fill the mixing bowl max. ¾ with ingredients.
1. Cover the drive shaft of the mixing drive with
the safety cover (18):
- Insert the two hooks of the safety cover in
the recesses on the appliance.
- Press button (19) in the direction of the ar-
row and press the safety cover down at the
same time.
- Release the button. The safety cover is
tightly attached to the appliance.
2. Cover the worm casing connector with cover
(17):
- Set the connector ring (12) to OPEN posi-
tion.
- Attach the cover to the connector ring.
- Turn the connector ring with the cover
towards LOCK position.
3. Press the lever (3) with your right hand in
the direction of the arrow. The swivelling arm
moves up. Move the swivelling arm with your
left hand at the same time to the limit stop. The
swivelling arm must audibly lock in place. The
lever moves back to its initial position.
4. Place the mixing bowl in such way in its sup-
port that the handle stands above the arrow
. Turn the mixing bowl at the handle in the
direction of the arrow to the limit stop (LOCK).
75