Motor Housing; Kneading Machine And Meat Grinder Accessories; Blender Accessories; Storage - Profi Cook PC-KM 1004 Instrucciones De Servicio

CAUTION:
• Do not use a wire brush or other abrasive
utensils for cleaning.
• Do not use aggressive or abrasive cleaning
agents.

Motor Housing

• Clean the housing only with a damp cloth and a
squirt of washing-up liquid. Dry with a cloth.
Kneading Machine And Meat Grinder Acces-
sories
CAUTION:
The attachments are not suitable for dishwasher.
Heat and aggressive cleaning agents may warp
or discolour the attachments.
• Parts which have come into contact with food
can be rinsed out with water.
• Rinse with clean water and dry thoroughly.
• Brush some vegetable oil on the meat grinder
sieves after drying.

Blender Accessories

Pre-Cleaning
Fill the mixing container half with water and run the
appliance for approx. 10 seconds. Dispose of the
liquid.
• Remove the mixing container for thorough
cleaning.
WARNING: Risk of injury!
Knife and knife assembly are sharp. Handle with
great care during disassembly, cleaning and as-
sembly.
• Always disassemble the mixing container after
use.
• Unscrew the threaded coupling from the mixing
container.
• Remove knife assembly and sealing ring from
the threaded coupling.
• Remove the safety ring from the mixing con-
tainer. Use the thread on the mixing container.
Mixing Container
• The glass jar of the mixing container can be
washed in warm sudsy water. Rinse with clean
water and dry thoroughly.
Safety Ring, Sealing Ring, Knife Assembly And
Threaded Coupling
• Rinse these components only briefly in hot
water.
• Assemble your mixing container in reverse or-
der after cleaning and drying. Observe illustra-
tion on page 4.

Storage

• Clean the appliance as instructed. Ensue that
all accessories are completely dry.
• We recommend that you keep the appliance in
the original packaging if it will not be used for
long periods.
• Always store the appliance out of the reach of
children in a dry, well ventilated place.

Troubleshooting

The appliance does not function
Possible cause:
The appliance has no power supply.
Remedy:
• Check the socket with another appliance.
• Plug in the mains plug correctly.
• Check the main circuit breaker.
Possible cause:
The appliance is faulty.
Remedy:
• Contact our service center or a specialist.
Further possible causes:
Your appliance is equipped with safety switches.
They prevent accidental motor start.
Remedy:
• Check correct position of
- swivelling arm (2)
- mixing container (1) or
- safety cover (18).
81