Nexgrill UNIVERSAL PARTS 710-0007 Manual De Instalación página 13

FOR MISSING PARTS, PLEASE CALL CUSTOMER SERVICE AT 1-800-913-8999
810-1750-S ROTISSERIE BURNER
Note: Keep all screws with the components they are
removed from to make re-installation
Step 13.
Using a screwdriver, remove the three screws from the back
panel of the firebox from the inside to access to the rotisserie LP
brass orifice on the back side of the grill. Set aside the screws for
later re-installation. See Illustration-11.
Step 14.
Use the provided large wrench to loosen the gas hose coupling
nut while using an adjustable wrench to hold the gas hose
secure. After the rotisserie gas hose is detached from the
coupling nut, use the gas orifice tool and small wrench to
remove the LP brass orifice from the gas hose. Install the 1.35
mm RED natural gas orifice. DO NOT BEND THE GAS HOSE.
BENDING THE GAS HOSE COULD DAMAGE TO THE HOSE THAT
MAY RESULT IN FIRE OR EXPLOSION AND MAY CAUSE PERSONAL
INJURIES OR PROPERTY DAMAGE. See Illustrations 12 and 13.
Step 15.
Re-attach the gas hose to the rotisserie coupling nut. Leave the
back panel of the grill off until the conversion and leak testing
has been completed.
Step 16.
After leak testing has been completed, and any leaks have
been resolved, re-assemble the rotisserie cover using the
screws that were set aside in step
INSTALLATION INSTRUCTIONS
easier.
13.
Illustration-11
Illustration-12
-Existing Rotisserie LP
Gas Orifice
-Replacement Rotisserie
Natural Gas Orifice
(identified by number)
Rotisserie Burner 1.35 mm (RED)
Illustration-13
13
Cover Bolts
Retaining Nut
Brass Orifice