Connecting To Natural Gas Source - Nexgrill UNIVERSAL PARTS 710-0007 Manual De Instalación

FOR MISSING PARTS, PLEASE CALL CUSTOMER SERVICE AT 1-800-913-8999
CONNECTING GRILL AND NATURAL GAS SOURCE
1. Cover the nipple using either gas resistant teflon tape or pipe dope. Tighten quick-connect coupling onto
pipe nipple that connects to natural gas supply (Figure A).
2. After the conversion of the grill is complete, make sure the natural gas supply valve is in the OFF position.
Attach the natural gas hose to the natural gas supply by sliding the sleeve back on the socket and inserting
the plug. Let the sleeve slide forward to secure the quick-connect socket to the natural gas supply valve
is in the OFF position and attach
natural gas hose to socket. Slide sleeve back on socket (Figure B) and insert plug until sleeve snaps forward,
securing plug into socket. Make sure proper leak testing is performed on the connects before using the grill.
Natural Gas Supply
Supply Valve
When connecting the quick-connect to the natural gas supply line, a pipe fitting is mandatory,
Supply Valve
Supply Valve
DISCONNECTING GRILL AND THE NATURAL GAS SOURCE
1. Make sure the natural gas supply valve is in the OFF position.
2. To disconnect, slide sleeve back and pull out the plug.
INSTALLATION INSTRUCTIONS
Quick-connect
Coupling
Pipe Nipple
Pipe Fitting
and CANNOT be substituted with a flare fitting.
Supply Valve
Insert cover when
hose is disconnected
Sleeve
Flare Fitting
Supply Valve
22
Plug Hose
Supply Valve