Conversion Instructions 810-8533-S - Nexgrill UNIVERSAL PARTS 710-0007 Manual De Instalación

FOR MISSING PARTS, PLEASE CALL CUSTOMER SERVICE AT 1-800-913-8999
CONVERSION
INSTRUCTIONS
810-8533-S
WARNING:
!
Only use the designated orifice designed for your
specific grill model. Always double check the
millimeter size on the orifice tip's side before
installation. Use of other orifices could lead
to personal injury, property damage and void
the warranty of your grill.
Note: Double check that all control knobs are in the off
position, LP tank valve is closed and tank is
disengaged from regulator and detached from grill.
Step 1.
Using an adjustable wrench to secure the gas manifold in place,
use a ¾" wrench to loosen the coupling nut connecting the gas
hose to the manifold. Remove the LP gas hose/regulator
assembly. Install the natural gas hose assembly and tighten the
coupling nut to the manifold using the two wrenches.
See Illustration-1.
Step 2.
Remove cotter pin from side burner "foot".
Carefully lift the side burner up and away from the gas valve
nozzle. Set aside the burner and the screws for later
re-installation. See Illustration-2.
Cotter Pin
Illustration-2
Step 3.
Open the grill lid and remove the warming rack, cooking
grates, and flame tamers following the instructions contained
in the Owner's Manual for your grill. Set these parts aside for
later re-installation. See Illustration-3.
INSTALLATION INSTRUCTIONS
Illustration-1
Illustration-3
18
Cooking Grates
Heat Shields
Warming Rack