Nexgrill UNIVERSAL PARTS 710-0007 Manual De Instalación página 21

FOR MISSING PARTS, PLEASE CALL CUSTOMER SERVICE AT 1-800-913-8999
810-8533-S ROTISSERIE BURNER
!
CAUTION:
Only use the designated orifice designed for your
specific grill model.
Note: For ease of assembly, you may leave the screws with
the components as they are removed.
Step 10.
Using a screwdriver, remove the three screws from the back
panel of the firebox from the inside to access to the rotisserie LP
brass orifice on the back side of the grill. Set aside the screws for
later re-installation. See Illustration-8.
Step 11.
Use the provided large wrench to loosen the gas hose coupling
nut while using an adjustable wrench to hold the gas hose secure.
After the rotisserie gas hose is detached from the coupling nut,
use the gas orifice tool and small wrench to remove the LP brass
orifice from the gas hose. Install the 1.35 mm RED natural gas
orifice. DO NOT BEND THE GAS HOSE. BENDING THE GAS HOSE
COULD DAMAGE TO THE HOSE THAT MAY RESULT IN FIRE OR
EXPLOSION AND MAY CAUSE PERSONAL INJURIES OR PROPERTY
DAMAGE. See Illustrations-9 and 10.
Note: Bending the gas hose could result in damaging the
supply line.
Step 12.
Re-attach the gas hose to the rotisserie coupling nut. Leave the
back panel of the grill off until the conversion and leak testing
has been completed.
Note: Keep the back panel off until after all conversion
steps and gas leak testing has been completed.
Step 13.
After leak testing has been completed, and any leaks have been
resolved, re-assemble the rotisserie cover using the screws that
were set aside in step 10.
Note: Follow the leak testing section instruction of this
manual prior to using this grill
INSTALLATION INSTRUCTIONS
Illustration-8
Retaining Nut
Illustration-9
-Existing Rotisserie LP
Gas Orifice
-Replacement Rotisserie
Natural Gas Orifice
(identified by number)
Rotisserie Burner 1.35 mm (RED)
Illustration-10
21
Cover Bolts
Brass Orifice