Reliable VERVE 100SR Manual De Instrucciones página 10

USING THE FOOT PEDAL
The Foot Pedal is used to control the raising and lowering of the ironing roller, as well as its
speed. There are 3 positions: A, B and C.
Position A is the Starting Position. The roller remains in the raised position. The Foot Pedal
is not in use.
Position B is the Press Position. The roller is lowered and ready for pressing when you apply
light pressure to the Foot Pedal.
Positions C is the Working Position. The roller is lowered and rotating. In Position C, the
Rotary Press has an electronic speed control. The more you step on the foot pedal, the
faster the roller will rotate.
Note: The Reliable Rotary Press is fitted with an energy-saving circuit. If the foot pedal
is not operated for up to 8 minutes, the heater and steam generator are automatically
switched off. When the foot pedal is pressed again, the heating shoe, and if appropriate,
the steam generator, are switched on again. The most recently set ironing setting has
been reached only when no LEDs are flashing. Ironing can then be continued.
07