Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
damage if the unit has fallen over), if there is visible damage, if the unit is malfunctioning, or if
the collecting table is wet (for example, if the water tank has been over-filled).
18.
Switch off the power only when the ironing roller is completely raised.
SAVE THESE INSTRUCTIONS. For household use only.
SETTING UP THE ROTARY PRESS
1.
To set up your Rotary Press, first unhook the power cable. With your left hand, tightly
grip the Connecting Rod (A) in the lower third area. With your right hand, push the
Locking Lever forward and hold it pressed. To prevent the Rotary Press from rolling
away, place one foot in front of or on the frame.
2.
Raise the ironer slightly and then release the Locking Lever.
3.
Now raise the Rotary Press with both hands up till it stops in the fully upright position,
making sure that the Locking Lever engages. You should hear it click into place. The
Rotary Press can be easily rolled on its rollers.
4.
Connect the power cable plug of the Rotary Press into the socket.
Note: Remove the protective paper (wrapped around the ironing roller for shipping) and
discard it.
FOLDING THE ROTARY PRESS FOR
STORAGE
5.
Before folding the Rotary Press, unplug the power cable from the socket. The Rotary
Press must be completely cooled down. With the left hand, grip the connecting rod
and raise it slightly. Push the bolt, located on the underside of the collecting table, with
your right hand until it disengages.
6.
Allow the ironing roller to lower slowly until you hear it engage the locking mechanism.
The Rotary Press can be easily rolled on its rollers.
06
Publicidad
Tabla de contenido
