Reliable VERVE 100SR Manual De Instrucciones página 24

REPLACING OR RENEWING THE IRONING ROLLER COVERS
The ironing roller covers may only be replaced when the heating shoe is cold.
The ironing roller is covered by three layers.
A. Ironing cloth of grey cotton, replaceable. This cover can be washed at 86° F (30° C).
However, there is a risk the cover shrinks when washed. In this case, we recommend
fitting a new ironing cloth.
B. The soft padded cover is replaceable. This cover may not be washed but should only be
shaken out slightly.
C. Jute cover, not replaceable
UNWINDING THE IRONING COVERS
1. Pull out the cord loops at both ends of the roller and open the loops.
2. Switch on the Service function: Press and hold button 15 "Continuous Steam" and the
power switch. The heater for the heating shoe is switched Off in this mode.
3. Press the foot pedal and pull the ironing cloth (A) forward to remove. This causes the
ironing roller to rotate in reverse without a closing function.
4. Press the foot pedal again and pull the padding cover (B) forward to remove. The jute
cover (C) remains on the roller.
21