Reliable VERVE 100SR Manual De Instrucciones página 12

MANUAL RELEASE FOR SERVICE CASE
When needed, it is possible to raise the iron
roller to a service position.
You can raise the iron roller to this position
only when the power is turned Off. The roller
must be in non-ironing position (roller up).
To operate, push the release lever manu-
ally back to the red strip located on the
side of the unit which is approximately 180°
from the original position of the lever (see
picture).
The ironing roller is raised to the service
position - two inches over the heating shoe.
To return the roller back, pull the manual
release lever completely forward to the
original position.
Note: Never switch ON the Rotary Press
when the ironing roller is raised to the
service position.
ABOUT THE TELESCOPIC MECHANISM OF THE LEVER
The release lever has a telescopic feature to simplify the use of the lever. If you have dif-
ficulty in pushing the lever in folded position, then pull to unfold the telescopic arm. This will
reduce the force necessary for moving the lever in both directions.
Return the telescopic lever back to the folded position after usage.
09