Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
WINDING THE IRONING COVERS
Note: All layers must project evenly and be centered at both sides of the ironing roller so
that the roller remains open for ventilation.
1.
Unwind the jute cover (C) approximately 10 inches (25cm).
2.
To wrap the ironing roller, press the buttons of steam settings min 17A and maximum
17C. This means that the ironing roller will remain in the lowered position even when
the foot pedal is operated.
3.
The padding cover has a smooth and rough side. Only one short side of the cover is
trimmed. Place the trimmed short side on the jute cover with the rough side upwards.
Press the foot pedal and wind the padding cover onto the ironing roller.
4.
When winding on the padding cover, make sure that the cover is aligned at the left
and right with the ironing roller. To do this, spread the padding cover smoothly to the
right and left by gently brushing with your hands as the pad is rolling on, causing it to
slightly expand outward. After winding on the padding cover, allow the ironing roller to
rotate for approximately ten turns.
22
Publicidad
Tabla de contenido
