Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
EMPTY THE WATER TANK
Switch off the power and unplug.
After use, the water tank should be emptied. Do this before folding and storing the Rotary
Press.
1.
Place a bucket under the water tank. Using a suitable coin, undo the drain plug and
unscrew it completely. When unscrewing the drain plug the expanding polystyrene float
for Remaining Water LED (19) drops out. Now drain the water tank.
2.
To close the water tank, fit the polystyrene float to the pin of the drain plug and insert
it vertically into the opening of the water tank. Tighten the drain plug.
TECHNICAL SPECS & WARRANTY
INFORMATION
WARRANTY & REPAIR
1.
Do not disassemble or attempt to repair this appliance. Incorrect reassembly or repair
could cause considerable damage, risk of fire, electric shock, or injury to persons when
the appliance is used.
2.
Service under the warranty may be obtained by returning the appliance, along with a
Proof of Purchase (such as the purchase receipt) to:
Reliable Corporation
100 Wingold Avenue, Unit 5
Toronto, Ontario
Canada M6B 4K7
www.reliablecorporation.com
24
Publicidad
Tabla de contenido
