Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
5.
After the tenth turn, the end of the padding cover must lie on the top of the ironing
roller. As pictured, place the ironing cloth (A) on the padding cover with the wrong side
upwards making sure that the cord ends project evenly. Wind the ironing cloth onto the
ironing roller.
6.
Wind on the ironing cloth completely and make sure that the end of the ironing cloth
lies on the heating shoe.
7.
Tighten the cord at both ends of the roller, first on the inner and then on the outer
ends of the ironing cloth.
8.
Wrap the cord ends round twice, pull them tight and then tie. The end of the cord must
remain tensioned during the whole operation. Slide the ends under the ironing cover.
Press Continuous Steam button (the Rotary Press returns to the main program) or
switch the Power Switch Off and then On again. The Rotary Press restarts in the main
program and the ironing roller lifts up.
23
Publicidad
Tabla de contenido
