Technical Data Of The Communication Interface; Ethernet Connections; Network Topology; Contact - SMA SUNNY HIGHPOWER PEAK1 Instrucciones De Instalación

SMA Solar Technology AG
5.6 Technical Data of the
Communication Interface
Interface Parameters
Ethernet Cable
RJ45 connector: 2 pcs. RJ45
for Ethernet
Galvanic interface insulation
Direct protection against

contact

Short-circuit protection
Communication
Cable
Max. number of inverters
Table 5.10 Technical data of the communication interfaces
1)
(see Section 2.8 "Ethernet Connections", page 27)

5.7 Ethernet Connections

Figure 5.4 Pin assignment of the RJ45 plug for Ethernet
Installation Guide
Parameter details
Cable sheath diameter ( ⌀ )
Cable typ
Cable characteristic
impedance
Wire size
Cable shield termination
Double/reinforced insulation

Network Topology

Max. cable length between
inverters
Per SMA Inverter Manager
Pin
assignment
Ethernet
1. RX+
2. RX
3. TX+
4.
5.
6. TX-
7.
8.
Specification
2 x 5 to 7 mm
STP cable (Shielded Twisted Pair,
CAT 5e or SFTP CAT 5e)
100 Ω to 120 Ω
0.14 to 0.25 mm² (depending on
the design of the RJ45 plug)
Via RJ45 plug
Yes, 500 Vrms
Yes
Yes
Star connection, ring connection
and daisy chain
100 m
42
Color standard
Cat. 5 Cat. 5
T-568A T-568B
Green/white Orange/white
Green Orange
Orange/white Green/white
Blue Blue
Blue/white Blue/white
Orange, Green
Brown/white Brown/white
Brown Brown
SHP75-10-STP60-10-IA-xx-18
5 Technical Data
1)
47