Channel / Frequency Selection; How To Transmit The Frequency To The Transmitter / Act Function; How To Install The Receiver Into A 19" Rack - Beyerdynamic Opus 600 Manual Del Usuario

50
2.7

Channel / frequency selection

• The NE 600 provides 16 adjustable frequencies.
• If you want to change the selected frequency, press the
Scan button until the channel indicator
Press the "Scan" button
will search for an interference-free frequency automatically.
• The frequency will be displayed as number or letter
2.8 How to transmit the frequency
to the transmitter / ACT function
• Using the "ACT" button
will be transmitted to the transmitter.
• Press the "ACT" button
transmitter with the "ACT" mark or infra red point in front
of the infrared diode between the "ACT" and "Scan"
button.
• As soon as the frequency has been transmitted to the
transmitter, the "ACT" function will be finished auto-
matically.
2.9

How to install the receiver into a 19" rack

NE 600 S one channel receiver
• To install the receiver into a 19" rack mount the optional FB 71 mounting bracket to the right and
left hand side of the receiver.
• If you would like to install two NE 600 S receivers into a 19" rack, mount connecting plates
between the top and bottom of the two receivers and the FB 72 mounting bracket to the right and
left hand side of the receiver.
FB 71
NE 600 D dual channel receiver
• To install the receiver into a 19" rack mount the optional FB 72 mounting bracket to the right and
left hand side of the receiver.
FB 72
will flash.
once again so that the receiver
the frequency of the receiver
and hold the switched on
Opus 600 – NE 600 Diversity Receiver
NE 600 S / D
.
NE 600 S / D
FB 71
FB 72