General Information - Beyerdynamic Opus 600 Manual Del Usuario

Opus 600 – ZAS 800/900 Antenna Splitter
1. Mount the ZAS 800/900 antenna splitter and the NE 600 receivers into a 19" rack by using the
mounting brackets.
2. Connect the supplied antennae to the antenna sockets A/B
antennae. For mounting the antennae on the front use the optional FB 30 mounting bracket.
3. Connect the NE 600 receivers to the ZAS 800/900 antenna splitter with the supplied cables.
4. Connect the power supply unit to the DC-connection
the indicated voltage corresponds to the local voltage.)
5. Switch on the ZAS 800/900 antenna splitter

2.11.3 General information

1. The antenna sockets
the rack housing.
2. For the connection of remote antennae use usual 50 Ω coaxial cables. The longer the cable, the
higher the RF signal loss. Therefore, the cable length should not exceed 6 m.
The larger the diameter of cable, the lower the signal loss. If you need cables longer than 6 m you
should therefore use cables with a larger diameter to reduce the loss of signal.
3. Use 50 Ω coaxial cables to connect the NE 600 receivers to the ZAS 800/900 antenna splitter. The
distance between these devices should be as short as possible. We recommend using the supplied
cables.
4. Supplied accessories:
8 x RG 58 AU cables, 40 cm (TNC)
1 pair FB 30 rack mount brackets (incl. front mounting option)
1 x power supply unit
.
have a voltage of 8 V DC. To avoid a short circuit the sockets must not touch
. You can also use optional remote
and to AC power. (Caution: Make sure that
53