Beyerdynamic Opus 600 Manual Del Usuario página 62

62
Set RF output power
• There are two RF levels: RF-Low and RF-Hi
• Press the "MODE" button until "RF POWER LOW" or "RF POWER HIGH" is shown on the display.
• Press the "SET" button once to activate the function. The display screen flashes.
• Press the "SET" button once more to select the desired RF output power.
• Press the "MODE" button to confirm and save your settings.
Activate/deactivate mute function
• The "MUTE" function temporarily mutes the audio signal.
• Press the "MODE" button until "MUTE MODE" is shown on the display.
• Press the "SET" button once to activate the function. The display screen flashes.
• Press the "SET" button once again to select "MANUAL" or "DISABLE".
• To confirm and save, press the "MODE" button.
• The "MUTE" button works when the "MANUAL" function is selected in "MUTE MODE".
• The "MUTE" button does not work when the "DISABLE" function is selected in "MUTE MODE".
Activate/deactivate locking function
• Press the "MODE" button until "SET LOCK" is shown on the display.
• Press the "SET" button once to activate the function. The display screen flashes.
• Press the "SET" button once again to select "LOCK" or "UNLOCK".
• To confirm and save, press the "MODE" button.
• The locking function will be deactivated automatically if the battery level is too low.
• The "MUTE" button functions even when the locking function is activated.
Note
As long as the locking function is activated, the "AF GAIN", "RF POWER" and "MUTE MODE"
parameters cannot be changed.
Opus 600 – TS 601 Beltpack Transmitter