Beyerdynamic Opus 600 Manual Del Usuario página 61

Opus 600 – TS 601 Beltpack Transmitter
Channel/Frequency/Band
• Channel, frequency and band are set in-factory and so the parameter values are shown after
executing the ACT function. These values cannot be adjusted.
Channel
Frequency
Adjust sensitivity
• Press the "MODE" button until "AF GAIN" is shown on the display.
• Press the "SET" button once to activate the function. The display screen flashes.
• Press the "SET" button once more to select the desired sensitivity level.
• Press the "MODE" button to confirm and save your settings.
• The following settings are available:
• The higher the sensitivity, the lower the dynamic range of the input signal. This means that noise or
feedback may occur.
Low = low level
Mid = neutral level
High = high level
LINE = setting for guitar or bass
Band
61