Ts 601 Beltpack Transmitter; Controls And Indicators - Beyerdynamic Opus 600 Manual Del Usuario

58
4.

TS 601 Beltpack transmitter

4.1

Controls and indicators

Audio input, 4-pin mini XLR connector for microphone (lavalier or neckworn). The pin assignment
is indicated in chapter 4.5 AF pin assignment.
Mute button for temporarily muting the audio signal.
Transmitting antenna.
Transmitter housing. Contains the battery compartment and the transmitter's electronic components.
LCD display for displaying the transmitter parameters.
SET button for adjusting the settings for the sensitivity of the audio input and the RF output.
MODE button for displaying and selecting parameters such as audio sensitivity and RF level.
On/off button for turning the device on or off (hold for 2 seconds).
ACT receiver diode automatically synchronises the transmitter and receiver frequencies.
Battery compartment for two 1.5V (AA) batteries or NiMH rechargeable batteries.
Battery compartment cover is hinged to enable the removal of batteries.
External MUTE connector. If the external mute cable MJ-70 (optional) is connected, the user can
temporarily mute the audio signal.
Belt clip. Using the removable belt clip the transmitter can be attached to a belt, waistband or guitar
strap.
Opus 600 – TS 601 Beltpack Transmitter