How To Connect And Position Remote Antennae - Beyerdynamic Opus 600 Manual Del Usuario

Opus 600 – NE 600 Diversity Receiver
2.10

How to connect and position remote antennae

In multichannel systems we recommend the use of the AT 70 A/B UHF antenna set consisting of antennae,
cables, antenna boosters and mounting kit.
1. Connect the receiving antennae to the corresponding antenna inputs and place the antennae to the
right and left of the receiver. Diversity reception is improved when the antennae are vertical or slightly
tilted.
2. The distance between the two receiving antennae should be at least 1 m.
Auditorium
> 1 m
A
> 1 m
3. The distance between transmitting and receiving antennae should be at least 3 m to avoid
overloading and interference between different channels. We therefore recommend installing the
antennae in a high position, especially in multi-channel systems.
Operating range of the transmitter
Please note:
1. Install the receiving antennae in the same area as the transmitter.
2. To avoid interference do not install the antennae near digitally controlled components.
3. Keep a minimum distance of 0.5 m from metallic objects, including reinforced concrete walls or
pillars.
4. Do not bend the antenna cables at the antenna input, and ensure that they are not subjected to
undue stress.
> 3 m
B
Stage
4. If the operating range of the transmitters is
greater than the stage, the antennae can be
mounted vertically on the ceiling. The distance
between the two receiving antennae should
be approximately half the total operating
range.
51
Stage