Initial Operation; Transmitter Parameters - Beyerdynamic Opus 600 Manual Del Usuario

60
4.3

Initial operation

1. Connect the lavalier or headband microphone or instrument cable to the audio input before you
turn on the transmitter.
2. Tighten the nut on the connector clockwise to prevent the cable being accidentally pulled out.
3. To turn on the beltpack transmitter, press the "ON" button.
Microphone connector

4.3.1 Transmitter parameters

• Press the "MODE" button to go to one of the parameters listed below.
• Press the "SET" button once to activate the required function. The display screen flashes.
• While it is flashing, select the desired setting for the parameter by pressing the "SET" button.
• To confirm and save, press the "MODE" button.
Opus 600 – TS 601 Beltpack Transmitter
Headset
Lavalier
For a secure attachment, insert
into the socket with the
"nose" pointing downwards.
©
A Channel
©
Frequency
B
©
C
AF gain
©
RF output power
D
©
Band
E
©
F Mute function
©
Locking function
G