Used Symbols - Dremel Versatip 2000 Manual De Instrucciones

GB
ORIGINAL INSTRUCTIONS

USED SYMBOLS

READ THESE INSTRUCTIONS
Before using the Dremel Versatip, make sure you
completely read and understand this manual.
WARNING
!
Failure to follow all instructions listed below
may result in electric shock, fire and/or serious injury.
a. Keep work area clean and well lit. Cluttered
and dark areas invite accidents.
b. Do not keep or bring combustible materials
near the tool.
c. Keep children and bystanders away while
operating the tool. Distractions can cause you to
lose control.
d. Only use outside or in well-ventilated rooms.
PERSONAL SAFETY
a. Stay alert, watch what you are doing and use
common sense when operating the tool. Do
not use the tool while you are tired or under
the influence of drugs, alcohol or medication.
A moment of inattention while operating tools may
result in serious personal injury.
b. Use safety equipment. Always wear eye
protection. Safety equipment such as dust
mask, non-skid safety shoes, hard hat, or hearing
protection used for appropriate conditions will
reduce personal injuries.
c. Do not overreach. Keep proper footing and
balance at all times. This enables better control of
the tool in unexpected situations.
d. Dress properly. There is a danger of burning
yourself with the flame or with liquid soldering tin.
Wear protective clothing to protect yourself against
burns. Keep your hair, clothing and gloves away
from flame. Loose clothes or long hair can catch
fire.
e. Secure the workpiece. Use a clamping device to
hold the workpiece. This allows you to use both
hands to operate the tool.
f. Keep this manual for future reference.
g. Do not use the appliance when it is
leaking, shows any sign of damage or is
malfunctioning.
h. If the appliance is leaking (gas smell)
immediately take it outside and check the
tightness without a flame, please always use
READ ALL
INSTRUCTIONS.
WORK AREA
soap sud. Filling or refilling the gas cylinder
must be done in a well ventilated place far
away from any possible sources of ignition,
open flames, pilot lights, electrical cookware
and away from other persons. Be sure to
observe the safety instructions and warning
notices on the refill cylinder do not make any
modifications to the appliance.
i. Do not work materials containing asbestos
(asbestos is considered carcinogenic).
j. Take protective measures when during work
dust can develop that is harmful to one's
health, combustible or explosive (some dusts
are considered carcinogenic); wear a dust
mask and work with dust/ chip extraction when
connectable.
TOOL USE AND CARE
a. Store your tool in an appropriate place with an
ambient temperature between 10°C and 50°C.
Allow your tool to cool off completely before
storing. Unused tools should be stored away
from children in a dry location. Switch off all
unused tools.
b.
WARNING
!
/ replacing tips and / or installing / replacing
the nozzle.
c.
WARNING
!
d.
WARNING
!
e.
WARNING
!
store at temperature above 50ºC.
f.
WARNING
!
g.
WARNING
!
INTENDED USE
The Dremel Versatip is intended for a variety of
applications you will find in the chapter "USE".
ENVIRONMENT
DISPOSAL
The unit, accessories and packaging should be sorted
for environment-friendly recycling.
SPECIFICATIONS
Description
Model number
Power source
Tank capacity
4
Always allow the tool to
cool fully before removing
Extremely flammable gas
under pressure.
Do not use near spark or
open flame.
Do not puncture or
incinerate container or
Keep out of reach of
children.
Do not try to disassemble
this unit.
Dremel Versatip
2000
Refined butane gas
± 17 ml. / ± 9 grams