Part 2: User Guide; How To Use The Keypad; Customer Support - ET Water SmartBox Generation 4 Serie Guía Para La Instalación

PART 2: USER GUIDE

How to Use the Keypad

IMPORTANT
This Smart Controller receives updated ir-
rigation schedules from the ET Water Central
Server using standard cellular technology.
The server sets the correct schedules based
on plant science and actual landscape
characteristics. The schedules automatically
adjust according to changes in your local
weather. A properly configured control-
ler should not require manual adjustment.
You may, however, wish to modify the run
time for a given station to account for any
unique landscape needs. These instructions
explain how to operate the controller via the
keypad, as well as how to identify troubleshooting conditions.
USING THE DISPLAY PANEL
View Program: Displays upcoming watering start time. Enter a station number to view its irriga-
tion schedule.
Adjust Program: Increase or decrease run time for one station or all stations. Enter a station
number to adjust run time for one station. Use the arrow buttons to scroll up or down to find the
percentage change you want to make.
Suspend Watering: Stops all scheduled irrigation. The controller will continue to connect to the
server to receive irrigation schedule updates. You can also suspend watering from your ETwater
Manager Web account.
Program Start: Run downloaded watering program for one station or all stations. Controller must
be configured online for this feature to operate.
Manual Water: Run one station or all stations for a specified number of minutes. Use 'up' arrow
button to select "multi". In this mode, you can manually water stations simultaneously. Note:
When watering stations individually, you can stack up to four stations by pressing the 'manual
water' button after the duration is entered. Note: For 'All' functionality, controller must be config-
ured online.
Reset: Resets your controller in the event it doesn't respond to manual commands. To reset the
controller, press buttons 1 and 9 at the same time. Hold for 3 seconds, and release together.
Sensor Setup: Enables rain sensor. If the rain sensor is enabled, a sensor MUST BE attached.
IMPORTANT:
This controller is designed to receive
schedules via the Internet. If you have
not activated your account with us via
the Web, or are not registered as the
user with ET Water, please call Cus-
tomer Support.

CUSTOMER SUPPORT:

Phone: 888-685-5505
Email: support@etwater.com
9