ET Water SmartBox Generation 4 Serie Guía Para La Instalación página 16

d. Select the number assigned to the START TIME you want the station to use by pressing the
number (1, 2, 3, up to 9) until that number appears on the START TIME display
i. If a START TIME is selected for a station, the number should be visible on the
display. If it is not selected, there should be a dash (-) in place of the number.
Attention: If no START TIME is set, the controller will not water.
ii. Press ENTER when complete.
e. Enter the DAYS TO SKIP BETWEEN WATERINGS using the NUMBER keys and press
ENTER. If more than 1 START TIME is selected, the station will default to every day watering
and will not ask which DAYS TO SKIP BETWEEN WATERINGS
To water every day, skip 0 days. To water every other day, skip 1 day.
f. Enter in the RUN TIME for the station using the NUMBER keys and press ENTER
g. Choose number of cycles *controller will not allow overlapping start times*
h. Enter in the BLOCK DAYS (days to not water) using the NUMBER keys 1 through 7 and press
ENTER
i. 1 = Sunday, 2 =Monday and so on. If a blocked day is selected, the letter of the day
will appear on the display
ii. Press Enter
If successful, the display should read "Saving station program"
i.
13