Cleaning And Care - Unold 48892 Instrucciones De Uso

17. During operation you can extend
the operating time by pressing the
Time + button in intervals of one
minute to a maximum of 60 min-
utes.
18. After expiration of the set time the
appliance automatically switches
off and a signal beeps ten times.
The display shows 0:00.
19. If the ice cream is not removed
within 10 minutes after the "fin-
ished" signal, the automatic cool-
ing function switches on to pre-
vent the ice cream from melting.
20. The automatic cooling function
keeps the ice cream cold for a
maximum of one hour.
Remove ice cream
21. Before removing the ice cream
from the appliance, switch off the
appliance with the POWER switch
and unplug the power cord from
the electrical outlet.
22. Remove the transparent lid.
23. Remove the ice cream container
from the appliance and carefully
pull the mixer out of the container.

CLEANING AND CARE

Before cleaning, always turn
off the appliance, unplug it
from the electrical outlet and
allow the appliance to cool.
1. Never clean the appliance with or
under water or other liquids. It is
especially important to keep the
30
Copyright UNOLD AG | www.unold.de
24. Transfer the ice cream to a suita-
ble container. Do not use sharp or
pointed objects for this; instead,
use a plastic or wooden spoon in
order not to damage the ice cream
container. We recommend using a
silicone dough scraper.
25. If desired, you can make more ice
cream right away. In this case,
start again with step number 1.
26. Tip: If you make fruit ice cream or
sorbet, remove the ice cream con-
tainer as soon as the program is
finished, transfer the ice cream
to a container suitable for freez-
ing and put this container in the
freezer so that the ice cream
freezes completely.
this ice cream may be slightly soft
inside, even if it is firmly frozen on
the outside.
27. If you do not wish to make more
ice cream, switch the appliance
off with the POWER switch and
unplug it from the electrical out-
let.
motor and the compressor from
coming into contact with water.
2. Do not use harsh or abrasive
cleaners.
3. The removable parts can be
cleaned in warm water with mild
Otherwise,