SHERCO SE 250i Manual De Propietario página 79

SE 250i / 300i
Control devices and controls (continued)
n aVE Function
Fig 4 AVE Function
n laP Function – automatic stopwatch
Fig 5 LAP function
n MaX speed Function:
Fig 6 MAX Speed Function
n hPErC Function - hours of operation
Fig 7 HPERC Function
78
Displays the average speed of the vehicle.
The average speed is displayed in the chosen
units, km / h (default) or mph (
Reset to 0 → AVE Function → Hold the Button
down for 2 seconds → 0.0 → Reset to 0 done
Displays the actual time of travel of the vehicle
as:
minutes and second if hours = 0
hours and minutes if > 0
Reset to 0 → LAP function → Hold the Button
down for 2seconds → 00'00 → Reset to 0 done.
Displays the maximum speed since the last TD
reset was performed. (
Reset to 0 → MAX Function → Hold the Button
down for 2 seconds → 00 → Reset to 0 done.
Displays the hours of operation of the vehicle.
This information can not be reset to 0.
BEYOND 9999 hours, the counter resets to 0.
p.79).
☛
p.77)
☛