Tabla de contenido
Publicidad
CONTROLLER SPECIFICATIONS
Input:
Voltage
Frequency
Power
Output:
Voltage
Frequency
Power
During operation
Operating temperature
Storage temperature
Circuit breaker
P1 optoisolator input
J2 optoisolator output
J21 power output interc.
P31 signal inputs
J23 three-phase output
Radio interference suppression
Auxiliary connectors
P1
J2
J21
P34
J17/J18
Cables
Weight (both models)
100, 120, 220, 240 Vac 10%, 1-phase
50 to 60 Hz
3000 VA maximum
100 Vac nominal
233 Hz
2%
2000 W maximum
1200 W
0°C to +40 °C
-20°C to +70°C
20 A for 220 or 240 input Voltage
40 A for 100 or 120 input Voltage
Minimum ON 3mA
24 Vdc, 60 mA and analog output 0-10 V
120 Vac, disregarding the mains (3A for heater band
1 A for forepump relay coil and Vent Device)
Temperature sensors
Speed detector
Oil level detector
100 Vac
Conforms to EN 55011 class A group 1
Conforms to IEC1000-4-2, 1000-4-3, 1000-4-4
Conforms to EN 61010-1
External INPUT commands (pins)
OUTPUT signals (sockets)
Vent Device, forepump and heater band (socket)
Spare external input connector
RS 232/422/485 connection (optional)
Mains cable (3-wire, 3-meter long)
Signals cable (10 m)
Pump cable (4-wire, 10-meter long)
33 kg (72,8 lbs)
50
TECHNICAL INFORMATION
10%
Maximum 5 mA
87-900-855-01 (B)
Publicidad
Tabla de contenido
