Installing The Bottom Shelf; Securing The Lid Stopper; Installing The Lid Handle; Assembling The Side Shelf - Pit Boss PRO Serie Manual De Operación

• Mount one stationary support leg to the hopper end of the main barrel
using four screws, locking washers, and washers, through the four pre-
drilled holes. Repeat installation for second stationary support leg.
NOTE: Fasten screws of the support legs only half-way to allow
easier installation of bottom shelf in next step.

3. INSTALLING THE BOTTOM SHELF

Parts Required:
Bottom Shelf (#19)
1 x
Screw (#A)
4 x
4 x Locking Washer (#C)
4 x Washer (#B)
Installation:
• From underneath, mount the bottom shelf to each support leg using a
screw, locking washer, and washer. Ensure the flat surface of the shelf
is facing up towards the grill barrel.
NOTE: Fasten screws of the bottom shelf only half-way all screws
have been installed. Once all screws are installed, then tighten
securely into the support legs.

4. SECURING THE LID STOPPER

Parts Required:
Lid Stopper (#3)
1 x
Installation:
• Secure the lid stopper onto the top of the main barrel using the pre-
installed screw on the top of the main barrel.

5. INSTALLING THE LID HANDLE

Parts Required:
Lid Handle (#11)
1 x
2 x Lid Handle Bezel (#10)
Installation:
• Remove the pre-installed screws from the lid handle. From inside the
barrel lid, insert one screw to protrude to the outside. Add a bezel on the
screw, then hand-tighten the screw (from the inside) into the lid handle.
• Repeat same installation for other end of lid handle.

6. ASSEMBLING THE SIDE SHELF

Parts Required:
1 x Side Shelf (#12)
3 x Tool Hook (#D)
Installation:
• Turn the side shelf upside down. On the edge of the side shelf with three
holes, install the tool hooks into each hole along the edge. Tool hooks will
secure to the self-clinching nut that is pre-mounted on the inside.
8
3
B C A
19
4
3
5
10
10
11
6
12
D
D
D