Publicidad
LEFT ( CLUTCH SIDE )
OPEN
INTERMEDIATE
LEFT (CLUTCH SIDE)
LOCKED POSITION
RELEASED POSITION
12
RIGHT ( THROTTLE SIDE )
CLOSE
CLOSE
OPEN
INTERMEDIATE
RIGHT (THROTTLE SIDE)
LOCKED POSITION
RELEASED POSITION
English
TO REMOVE/REPLACE DIFFUSERS
To remove diffusers for cleaning or maintenance, first slide the black open/
close lever at each side of the diffuser outward to fully open position.
Then slide the red lock lever at each side of the diffuser inward to release
lock system.
Finally slide back the black open/close lever inward to intermediate
position, and pull the black lever down/backwards to remove the diffuser
on each side.
To replace diffusers, place diffuser on helmet (contour of each diffuser
will match the recess of the helmet shell) and push on the center of
the diffuser until it snaps home. Repeat for the other side. Be sure the
diffusers are fully secured to the helmet shell and the red lock levers are
in the locked position.
NOTE: Do not use oils or waxes to lubricate vents or other moving
parts. If you must lubricate such components, sparingly use the silicone
lubricant supplied with your helmet for eyeport trim dressing.
Publicidad
Capítulos
