Publicidad
CLOSE
OPEN
6
CLOSE
OPEN
CLOSE
OPEN
English
TO ADJUST PEAK ANGLE
Slightly loosen all screws of the peak with a coin or flat blade screwdriver
so that the peak can be moved up and down without scratching helmet
surface. Put the helmet on and adjust the peak to the desired position.
Tighten the screws and take helmet off. Tighten all screws firmly but do
not over-tighten.
TO OPERATE MOUTHVENT
TX-4 / XD4
Simply push the switches/levers on each vent to open/close the vents.
When the shutter inside is open, air is directed to the mouth area to
provide fresh air inside the helmet.
When the shutter is closed, air is then directed up along the interior
surface of the face shield to help prevent fogging.
Simply push the switches/levers on each vent to open/close the vents.
Publicidad
Capítulos
