Publicidad
This product will be replaced or repaired under warrant y, for a period of (1) year,
beginning from the date of purchase by the original purchaser/user ("End User"), or
eighteen (18) months from the da te of shipment from SKYFOOD's ware house,
whichever expires first.
Accessories wil l be re placed o r repaired under wa rranty, for a period of (30) days,
beginning from the da te of purcha se by th e original purchaser/user ("En d User"), or
eighteen (18) months from the date of shipment from SKYFOOD's wa rehouse, whichever
expire s first.
This warranty shall not take effect until a properly completed and executed WARRANTY
REGISTRATION form has been received by SKYFOOD EQUIP MENT, LLC, within thirty
(30) days from the da te of purch ase. The WARRANTY REGISTRATION is available either
in the Instruction Manual of every Product or at SKYFOOD's website www.skyfood .us. The
End User must fill out the WARRANTY REGISTRATION form and send it to SK YFOOD
according to the instructions p osted on the referred website. Failure to do so will VOID
the warranty.
No extended warranties for third party products. There are no other express
warranties or conditions othe r than the one offered by each manufacturer for
products sold by SKYFOOD, not under the FLEETWOOD by SKYMSEN and
SKY MSEN brand.
For questions or assistance, do not return the p roduct or accessories to the store, please
call Toll Free 1-800-503-7534, or visit the Customer Service section at www.skyfood.us.
For faster service please have th e items name , serial number, and proof of purchase for
the operator to assist you.
SKY FOOD reserve s the right to change the term s of its limited warranty at any time
without any prior notice. It also reserves the right to change the design and
specifications of its equipment or any related documentation at any time. The e nd
user is not entitled to upgrades or refunds resulting from these changes.
Updates
These Terms and Conditions were last updated on January 14
4.2 Safety Procedures and Notes Before Switching Machine ON
Carefully read ALL INSTRUCTIONS of this manual before turning the machine ON.
Be sure to be familiar with the instructions and that you have well understood all
information contained in this manual.
supervisor or your nearest Dealer.
4.2.1 Danger
cause electrical shocks as well as electrical leak. Before use, check conditions of all
wires and cables.
4.2.2 Advices
Every function and operational procedure have to be very clear to the operator. Contact
your nearest Dealer for further questions.
sure it is the correct one.
4.2.3 Precautions
Cables touching the floor or close to the machine need to be protected against short
circuits.
Oil reservoir has to be full up to the required level as indicated. Check level and add oil
if necessary.
4.3 Routine Inspection
4.3.1 Advice
th
, 2014.
fingers between the belts and the pulleys and nor between the chain and the gears.
4.3.2 Precautions
noises.
show signs of being worn out.
between belts and pulleys, nor between the chains and gears.
IMPORTANT
An electric cable or electric wire with damaged jacket or bad insulation could
Be sure ALL INSTRUCTIONS in this manual have been thoroughly understood.
Any manual command (switch, button or lever) shall be given only after being
The electric cable has to be compatible with the power required by the machine.
When checking the tension of the belts or chains, DO NOT introduce your
Check if motors and sliding or turning parts of the machine produce abnormal
Check the tension of the belts and chains and replace the set when belt or chain
When checking tensions of belts or chain DO NOT introduce your fingers
Check protections and safety devices to make sure they are working properly.
If you have any question contact your
08
Publicidad
Capítulos
