Inserting The Bobbin - Janome MyStyle 100 Manual De Instrucciones

q
z
x
e
c
r
v
t
w
y

Inserting the bobbin

z Place the bobbin in the bobbin holder with the
z
thread running off as illustrated.
q Thread
q
x Guide the thread into the front notch on the
x
front side of the bobbin holder. Draw the
thread to the left, sliding it between the
tension spring blades.
w Front notch
w
e Tension spring blade
e
c Continue to draw the thread lightly until the
c
thread slips into the side notch.
r Side notch
r
v Pull out about 4" (10 cm) of thread. Attach the
v
hook cover plate. Check the threading by
referring to the chart shown on the hook cover
plate.
t Thread
t
y Hook cover plate
y
20