Janome MyStyle 100 Manual De Instrucciones página 56

Tabla de contenido

Publicidad

b
!4
n
b Raise and release the foot, and re-attach it
b
with the left side pin.
Starting just below zipper bottom stop, sew
across fabric to about 3/8" (1 cm) distance
from the basting line.
Turn fabric 90 degrees and sew a seam
the entire length of the zipper tape. Before
reaching the slider, stop the machine with
needle in fabric and raise the foot. Use seam
ripper to open a few inches of basting stitch.
!3
!3 Unstitch basting
!3
!4 3/8" (1 cm)
!4
n Unzip a few inches to clear a path for stitching.
n
At end of seam, sew a few stitches in reverse
to lock. Once both sides of zipper are sewn,
use the seam ripper to open the basting stitch.
52

Publicidad

Tabla de contenido
loading

Tabla de contenido