Threading The Machine - Janome MyStyle 100 Manual De Instrucciones

b
q
z
x
r
e
c
v
b
w
t
y

Threading the Machine

To set the needle thread:
Raise the presser foot.
Press the needle up/down button to raise the
thread take-up lever to its highest position.
Draw the thread from the spool and pass it
z z
under the thread guide.
q Thread guide
q
Draw the thread down along the right
x
x
channel and pull it up around the bottom of the
thread guide plate.
Pull the thread up along the left channel
w Right channel
w
e Thread guide plate
e
r Left channel
r
c Firmly draw the thread from right to left over
c
the thread take-up lever and down into the
take-up lever eye.
t Thread take-up lever
t
v Draw the thread down along the left channel
v
and slip the thread behind the needle bar
thread guide from the left.
y Needle bar thread guide
y
b Pass the thread through the needle eye from
b
the front.
22
.