Pin Tucking; Shell Tucking - Janome MyStyle 100 Manual De Instrucciones

q
w
q
w
e
r
q
w
e
e
r
60

Pin Tucking

Machine setting
q Stitch pattern:
q
w Stitch length:
w
e Thread tension:
e
r Presser foot:
r
Fold a fabric wrong side together and Lower the
needle into the fabric 0.1 – 0.2 cm inside the
folded edge.
Lower the foot and turn the screw to align the
guide on the foot with the folded edge.
Sew slowly while guiding the folded edge along
the guide.
Open the fabric and iron press the tucks.
q Screw
q
w Guide w
e Folded edge
e

Shell Tucking

Machine setting
q Stitch pattern:
q
w Stitch length:
w
e Thread tension:
e
r Presser foot:
r
Use a lightweight fabric (tricot, for example).
Fold and stitch on the bias.
When the needle swings to the right, allow the
needle to just clear the folded edge of the fabric.
After stitching, open the fabric and iron press the
tacks flat to one side.
NOTE:
Increase the needle thread tension to form
prominent tucks.
A
1.5 – 3
2 – 6
Blind hemming foot G
G
2 – 3
6 – 8
Buttonhole foot B