Electrical Connection - Sime SOLO 25 ErP Instrucciones De Instalación Y Mantenimiento

RESET
TWICE
ONLY
2.7

ELECTRICAL CONNECTION

The boiler is supplied with an electric
cable and the electric power supply to
the boiler must be 230V-50Hz single-
phase through a fused main switch.
The stat cable, whose installation is
12
bar
3
compulsory for obtaining a better
adjustment of the room temperature,
must be connected as shown in fig. 9 -
9/a.
NOTE: Device must be connected to
an efficient earthing system. SIME
5
6
7
KEY
2
1 Gas-oil pump
2 Pressure gauche intake
3 Pressure adjustment screw
1
declines all responsibility for injury
or damage to persons resulting
from the failure to provide for
proper earthing of the appliance.
Always turn off the power supply
before doing any work on the electri-
cal panel.
2
1
Fig. 8
Fig. 8/a
67