Ottobock 50A7 Epi Sensa Instrucciones De Uso página 9

► The initial fitting and application of the product must be carried out by
qualified personnel.
► Instruct the patient in the handling and care of the product.
► Instruct the patient to see a physician immediately if any exceptional
changes are noted (e.g. worsening of the complaint).
4.1 Selecting the Size
1) Measure the circumference of the forearm (approximately 12 cm below
the elbow).
2) Determine the size of the support (see size chart).
4.2 Application
CAUTION
Incorrect or excessively tight application
Skin irritation due to overheating, local pressure points due to tight appli­
cation to the body
► Ensure that the product is applied properly and fits correctly.
► When in doubt, do not continue to use the product if skin irritation
occurs.
NOTICE
Use of a worn or damaged product
Limited effectiveness
► Before each use, check the product for functional reliability and for
possible wear or damage.
► Do not continue using a product that is no longer functional, or that is
worn or damaged.
1) Fold over the top section of the support so that the pad pockets are
exposed (see fig. 1).
2) Pull the support over the forearm up to the elbow.
3) Fold back the section of the support that was folded over and pull the
support over the elbow (see fig. 2).
4) Position the support so that the epicondylus lateralis and epicondylus
medialis are positioned in the pad openings (see fig. 3).
5) When the patient is given the support, it must be checked for proper fit
and positioning.
9