Legal Information; Avant-Propos - Ottobock 17AO100 Instrucciones De Uso

Mounting the axial washers
If the preinstalled axial washers become worn, they have to be replaced with
new washers of the same thickness.
► Optional: Optimise the movement of the joint by replacing the axial
washers step-by-step: Use thicker washers if there is play in the medi­
al/lateral direction, thinner washers if there is resistance in plantar flex­
ion/dorsal extension.
8 Disposal
Dispose of the product in accordance with national regulations.

9 Legal information

All legal conditions are subject to the respective national laws of the country
of use and may vary accordingly.
9.1 Liability
The manufacturer will only assume liability if the product is used in accord­
ance with the descriptions and instructions provided in this document. The
manufacturer will not assume liability for damage caused by disregarding the
information in this document, particularly due to improper use or unauthor­
ised modification of the product.
9.2 CE conformity
This product meets the requirements of the European Directive 93/42/EEC
for medical devices. This product has been classified as a class I device
according to the classification criteria outlined in Annex IX of the directive.
The declaration of conformity was therefore created by the manufacturer
with sole responsibility according to Annex VII of the directive.

1 Avant-propos

INFORMATION
Date de la dernière mise à jour : 2018-06-20
► Veuillez lire attentivement l'intégralité de ce document avant d'utiliser le
produit.
► Respectez les consignes de sécurité afin d'éviter toute blessure et en­
dommagement du produit.
► Apprenez à l'utilisateur à bien utiliser son produit et informez-le des
consignes de sécurité.
► Conservez ce document.
20
Français