Endosee
®
Hysteroscope - User Manual
CAUTION:
substances to be spilled in or around the
cannula connector on the Handheld Monitor,
as damage to the electronics may occur.
6.3 Cannula Attachment and Detachment
In preparation for use, attach the cannula to the
electrical connector on the Handheld Monitor per
the following:
1. Peel apart the proximal end of the package and
remove the cannula.
2. Rotate the cannula to a position where the
"red dot" marking on the cannula aligns with
the matching dot on the Handheld Monitor.
Press it fully into place until a subtle
"click" of the connector detent locking
mechanism is felt.
CAUTION:
between the cannula and the Handheld Monitor
during assembly, as damage may occur.
Figure 6: Cannula Attachment
Do not allow any fluids or
Do not misalign the connectors
19