Instructions For Use - EdilKamin DAISY Instalación Uso Y Mantenimiento

Y
g. 4
Y
g. 5
bracket and upper horizontal ceramic element
C
bracket and lower horizontal ceramic element
D
g. 6
COVERING INSTALLATION
Z
C
D
F
G
Fig. 4/5
Disassemble the two metal brackets (C-D) that fasten the hori-
zontal ceramic elements by removing the eight side screws (Y)
and the four screws inside the top (Z).
Fig. 6
On the back, t the lower (F) and upper (G) horizontal ceramic
elements and the metal fastening brackets (C-D) using the holes
and the M4 milled pins provided.
NB:
Each horizontal ceramic element has 6 positions for xing it to
the metal brackets.
Secure the horizontal ceramic elements in each position using
opening A or B of the metal brackets (depending on where the
threaded insert lies on the horizontal ceramic element).
The metal bracket must be centred on the horizontal ceramic
element.
Use the following hardware for each xing position:
- 1 x M4 milled screw;
- 1 Ø5x15 washer placed between the horizontal ceramic ele-
ments and the metal brackets;
- 1 Ø5x15 washer placed between the metal bracket and the M4
milled screw.
position 1
X
posizione 1
bracket and upper horizontal ceramic element
CERAMICA SUPERI O R E C O N S U P P O R T O M E T A L L I C O
position 4 position 5
posizione 4 posizione 5
position 1
posizione 1
bracket and lower horizontal ceramic element
CERAMICA INFERI O R E C O N S U P P O R T O M E T A L L I C O
position 4 position 5
posizione 4 posizione 5
position 1
posizione 1
A B
A B
Supporto metallico
per ceramica
washer
rondella
Ø5x15
Ø5x15
M4 milled
vite M4 con
screw
testa zigrinata
- 45
-
position 3
position 2
posizione 2 posizione 3
position 2 position 3
posizione 2
posizione 3
position 6
posizione 6
DETTAGLIO X
Mattonella in ceramica
washer
rondella
Ø5x15
Ø5x15
horizontal ceramic
element
metal bracket
position 6
posizione 6