Setting The Volume - BRAND Transferpette electronic Instruccionesde Manejo

Setting the Volume

The volume for the Transferpette
of the instrument and can be changed quickly and easily.
What to do
1.
Activate volume
setting
2.
Change the volume
Reduce volume
Increase volume
3.
Confirm volume
setting
Important: By pressing the MENU key any procedure can be cancelled!
The display then moves to the next setting or back to the
initial display (depending on actual selection.)
38
® electronic is set at the factory to the nominal volume
How to do it
Press one of the arrow
keys to activate volume
selection. 'VOL' blinks.
Press the down arrow key
(-) to reduce the volume.
Holding the arrow key
down accellerates the rate
of change.
'VOL' continues to blink.
Press the up arrow key (+)
to increase the volume.
Holding the arrow key
down accellerates the rate
of change.
'VOL' continues to blink.
Press the ENTER key.
The display now shows the
new volume setting, in this
case, 102.8 µl in the PIP
mode.
Keys to press Display readout
–
+
1x