Tyres And Mounting; Maintenance And Care; Trouble Shooting; Disposal / Recycling Of Materials - Sunrise Medical Breezy BasiX2 Manual De Usario

tyres and mounting

tYres aND MouNtiNG
Solid tyres are standard.
With pneumatic tyres make sure that you maintain the correct tyre
pressure, as this can have an effect on wheelchair performance. If
the tyre pressure is too low, rolling resistance will increase, requiring
more effort to move the chair forward. Low tyre pressure also has a
negative impact on manoeuvrability. If the tyre pressure is too high,
the tyre could burst. The correct pressure for a given tyre is printed
on the surface of the tyre itself (min. 3.5 bar).
Tyres can be mounted the same way as an ordinary bicycle tyre.
Before installing a new inner tube, you should always make sure
that the base of the rim and the interior of the tyre are free of foreign
objects. Check the pressure after mounting or repairing a tyre. It is
critical to your safety and to the wheelchair's performance that
regulation air pressure be maintained and that tyres be in good
condition.

Maintenance and care

saFetY checK:
As the user you will be the first person to notice any possible
defects. We therefore recommend that before each use, you check
the following:
The tyre pressure is correct.
The brakes work correctly.
All removable parts are securely fastened (e.g. armrests, footrest
hangers, quick-release axles ...).
If there is any damage/defect, please contact your authorised dealer.
MaiNteNaNce:
Check the tyre pressure at regular intervals.
Check all tyres for wear and damage at regular intervals, at least
annually. Change the tyres as soon as there is any sign of damage
or wear.
Check the seat and back sling for wear and damage at regular
intervals, at least annually. Change these items as soon as there is
any sign of damage or wear.
Check all frame and backrest components for wear and damage at
regular intervals, at least annually. Change these items as soon as
there is any sign of damage or wear.
Check the brakes for wear and damage at regular intervals, at least
annually. Check that they are working properly and are easy to use.
Change the brakes as soon as there is any sign of damage or wear.
Check to make sure all bolts are secure (see the section on torque)
at regular intervals, at least annually. All screws which are critical to
using the wheelchair safely have safety nuts. Safety nuts should
only be used once and should be replaced after use.
Note:
If torque settings are given, then we strongly recommend
that you use a torque measuring device, in order to check that you
have tightened to the correct torque.
Please use only mild household cleaners when your wheelchair is
dirty. Use only soap and water when cleaning the seat upholstery
and lap belt.
Depending on the frequency and type of use, we recommend taking
your wheelchair to your authorised dealer regularly, but at least
within a year, to have it maintained by trained personnel.
cautioN!
Sand, salt and sea water can damage the bearings of the front and
rear wheels. Clean and dry the wheelchair carefully, after they have
been exposed to these elements.
hYGieNe WheN beiNG reuseD:
When the chair is to be reused, it should be prepared carefully, and
be wiped and treated with spray disinfectant on all surfaces which
could come into contact with the user.
If you need to do this quickly, you must use a liquid, alcohol-based
disinfectant suitable for medical products and devices.
Please pay attention to the manufacturer's instructions of the
disinfectant you are using.

trouble shooting

Wheelchair pulls to one side
• Check tyre pressure
• Check to make sure wheel turns easily (bearings, axle)
• Check the castor angle
• Check to make sure both castors are making proper contact with
the ground
castors begin to wobble
• Check the castor angle
• Check to make sure all bolts are secure; tighten if necessary (see
the section on torque)
• Check to make sure both castors are making proper contact with
the ground
Wheelchair squeaks and rattles
• Check to make sure all bolts are secure; tighten if necessary (see
the section on torque)
• Apply small amount of lubrication to spots where movable parts
come in contact with one another
Wheelchair begins to wobble
• Check angle at which castors are set
• Check tyre pressure
• Check to see if rear wheels are adjusted differently

Disposal / recycling of materials

Note: If the wheelchair has been supplied to you free of charge it
may not belong to you. If it is no longer required follow any
instructions given by the organisation issuing the wheelchair in order
that it may be returned to them.
The following information describes the materials used in the
wheelchair in relation to the disposal or re-cycling of the wheelchair
and its packaging.
Specific waste disposal or recycling regulations may be in force
locally and these should be taken into consideration when disposal
arrangements are made. (This may include the cleaning or
de-contamination of the wheelchair before disposal).
aluminium: Castor forks, wheels, side frames, armrests, frame, leg
rests, push handles
steel: Fasteners, QR axle
Plastic: Handgrips, tube plugs, castor wheels, footplates, armpads
and 12" wheel/tyre
Packaging: Low density polythene bag, cardboard box
upholstery: Woven polyester with PVC coatings and expanded
combustion modified foam.
Disposal or recycling should be done through a licensed agent or
authorised place of disposal. Alternatively your wheelchair may be
returned to your dealer for disposal.
BasiX 17
2