Tabla de contenido
Publicidad
Water content of the thermo-product heat exchanger (l)
Volume of expansion vessel integrated into thermo-product (l)
3 bar safety valve integrated into the thermo-product
Minimum and maximum pressure switch integrated into the thermo-product
Pump integrated into the thermo-product
Pump max. head (m)
*
ENVISION ANY INTEGRATIVE EXPANSION VESSEL ON THE BASIS OF THE SYSTEM WATER CONTENT.
The diagram at the side illustrates the behaviour of the
pump used on our thermo-products at the speeds that can
be set.
REARM
The gures below show the rearm positions of the hopper (85°C) and
H2O (100°C). It is recommended to contact the quali ed technician
if one of the rearms should be triggered, so as to verify the cause.
52
FEATURES
7
6
5
4
3
2
1
0
0
0,5
1
FUSE
If the stove has no power supply, check the status of the fuse,
positioned laterally (right) with respect to the machine, located on
the circuit board support.
Rearms
ENGLISH
14.6
*6
YES
YES
YES
6
1,5
2
2,5
Flow rate (m
/h)
3
Fuse
3
3,5
Publicidad
Tabla de contenido
