Auto-Power On/Off - Tennant VLX Manual De Instrucciones

To start the combustion engine, push the
lever returns automatically.
START
O FF
If the combustion engine does not start
immediately, the starter motor must not be
engaged for more than 5 seconds. This interval
can be repeated after a short rest period (about
8 - 10 seconds).
To stop the engine, turn the selector back
to the OFF position. In the event where
the alternator overheats, there is an
overtemperature protection device that stops
the machine; the "PAUSE MOTOR" error code
will be shown on the display
To start the machine, select forward or reverse

AUTO-POWER ON/OFF

The machine is equipped with an automatic
Selecting one of the three work programs, P1,
P2 or P3 temporarily activates the following
functions: centre brush, suction, side brushes;
the LED for the selected program lights up
together with the centre brush LED.
If the accelerator pedal is not pressed, after
a few seconds the functions will stop and the
AUTO-POWER-OFF mode.
All of the functions are automatically
reactivated whenever the operator presses the
accelerator pedal.
By releasing the accelerator, all the functions,
except for the combustion engine, are
automatically deactivated.
EN 12