Allmand NIGHT-LITE NL5000 Manual Del Operario página 25

NOTICE
Use caution when using compressed air or water / steam
pressure washers. Do not pressure–clean electrical compo-
nents, as this may cause damage.
Keeping the light tower clean is important to ensure proper
operation. Dirt and dust buildup acts as an insulator and may
cause the engine, generator and light assemblies to operate
at excessively high temperatures.
Use the following as cleaning guidelines:
• Clean the light tower trailer to remove all dust, dirt or
other foreign material.
• Clean the light tower and light fixture assemblies with a
damp cloth or sponge.
• Clean all electrical wiring and components by hand using
non-corrosive cleaner.
• Clean the inside of the engine compartment.
• Clean any oil or liquid spills inside the engine compart-
ment.
• Empty the fluid containment tray. See Draining The
Fluid Containment Tray.
Draining the Fluid Containment Tray
The light tower trailer is equipped with a fluid containment
tray designed to catch fuel, oil or coolant spills. The tray
should be drained periodically, and before storing the unit.
To drain the tray
1. Position a suitable container beneath the fluid contain-
ment drain (A, Figure 24), located on the left side of the
light tower trailer toward the rear.
2. Remove the drain plug.
3. Allow the tray to drain completely into the container.
NOTE: Raising the trailer tongue slightly using the tongue
jack will assist in draining the containment tray.
4. Reinstall the drain plug, tightening securely.
5. Dispose of the fluid in accordance with government
guidelines.
Figure 24
Model And Serial Numbers
Model and serial number information is required for product
support and repair parts. Following are the model and serial
number locations of the primary components.
Trailer
The serial number plate for the light tower trailer is located
on the front of the frame, in front of the light tower base (A,
Figure 25).
A
Figure 25
A
25
en