Preliminary Checks; Lubrification - Key Automation ALT-6 Manual De Instrucciones

G
ENERAL SAFETY RULES
Our compliments for your excellent choice. Your new
electromechanical barrier has been produced according to a
high quality and strict reliability, that's why it will assure you
long-lasting performance. This booklet will offer you all the
pieces of information you may need to install your barrier and to
safe guard your safety.
All our products have been made in conformity with the
regulations in force. We recommend using original part
only, during the installation and the upkeep. However, the
caution is unquestionably indispensable and nothing is
better than preventing accidents.
I
MPORTANT
Any installation or repair, or adjustment of the working
machinery by unqualified people is strictly prohibited
unless all the necessary precautions: power supply
disconnected (included possible batteries). All moving
mechanism must be provided with suitable protections.
KEY is not responsible for any possible damages or injuries to
people, object or animals, caused by any use not provided for this
booklet and/or any unauthorized modification of the product.
Keep this booklet enclosing it with technical brochure of
installation in a suitable place well-know by all the interested
people. Y ou have to operate the elimination of the packing
material (cardboard, plastic, polystyrene, etc.) in conformity with
the regulations in force, remembering that for a child a plastic
envelope could be extremely dangerous. Y ou have to teach the
people employed in using the automation about the control and
S M
ECURITY ECHANISM
IN MOUVEMENT
DISTANCE
PRODUCT
The barrier ALT-6 has been planned and built in order
to opening boom of 6 mt. like maximum.
responsible for any anomalous and different use of
the barrier ALT-6.
IMPORTANT: The barrier ALT-6 is not provided with
mechanical clutch and must be installed with its
KEY control panel or with a control panel
provided with electronic clutch.
USE OF THE AUTOMATION
As the automation can be controlled from the
distance through a remote control, you must always
check the full efficiency of all the safety devices. We
recommend inspecting periodically (every 6 Month)
by qualified people the adjustment of the electronic
clutch. If you need to calibrate the protection consult
the paragraph "Adjustment of the electronical clutch"
in the instruction booklet of the electronic central unit.
ENGLISH
D E
O NOT INSTALL THE LECTRIC SHOCK
AUTOMATION IN PLACE FULL
OF EXPLOSIVE MOISTURES
is not
KEY
security systems of the installation.
Don't install this product in explosive places.
U
PKEEP
For any kind of upkeep, you have always to cut off the power
supply.
For a correct upkeep of the installation where you have installed
ALT-6 barrier follow carefully these instructions:
Clean periodically the photocells.
Checking by qualified people the electronic clutch (see the
paragraph "installation of the electronic central unit").
In case of malfunction going and seeing qualified people.
D
EMOLITION
You have to operate the elimination of the materials in
conformity with the regulations in force. All material must be
divided by type (copper, aluminium, plastic, electrical central
unit). However there are not materials considered dangerous for
the handler.
D
ISMANTLING
In order to dismantle or to move away the automation, follow
these instructions:
Cut off the power supply and disconnect the electrical
installation. Dismantle the control console and all the other
components of the installation. If you have noticed that some
components have been damaged, you have to replace them.
U
SE
THE GLOVES

PRELIMINARY CHECKS

• Read carefully the instruction.
• Check that the product has not been damage
during the transport.
• Check that the electrical installation is in
accordance with the characteristic required by the
gear motor.
• Check that there is a suitable ground safety system
and that the metallic part of the installation is
connected.
• Remember that the automation makes easy the
use of the barrier but don't resolve the problems
due to a defective installation or to a faulty of
upkeep.

LUBRIFICATION

The gear motor ALT-6 is provided with permanent
lubrification
U K
SE GLASSES EEP THE PROTECTION
FOR WELDING CARTER