Using The Machine; Preliminary Operations; Safety Checks; Start-Up / Operation - Stiga 85 Combi QF Manual De Uso

Ocultar thumbs Ver también para 85 Combi QF:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 65
maintenance position quickly and easily, without 
having to dismantle any machine parts. (fig. 1.E).

6. USING THE MACHINE

IMPORTANT The safety regulations to
be followed are described in chap. 2. Adhere
strictly to the indications provided to avoid
serious risks and/or hazards.

6.1 PRELIMINARY OPERATIONS

Grass can be cut in two ways.
• Cut and shred grass and deposit it on 
the ground ("mulching" effect).
• Cut grass and discharge it on 
the ground from the read.
When the machine is delivered the cutting-
means assembly is set for mulching.
Expulsion of grass from the back of 
the cutting-means assembly.
• Slacken and remove the screw (fig. 13.A) 
which secures the deflector in place (fig. 13.B).
• Remove the deflector (fig. 13.B).
• Keep the screw and the deflector 
in a safe place for future use.

6.2 SAFETY CHECKS

Perform the following safety checks 
and make sure the results match 
those provided in the tables.
Always carry out the safety
checks before use.
6.2.1 General check
Object
Electrical cables.
Screws on the accessory 
and on the cutting means
Belt protection guard
Test drive with cutting 
means engaged (see 
the relative instructions 
provided on the machine's 
instruction manual)
6.2.2 Machine
For the following operations, see the 
relative instructions provided in the ride-on 
lawnmower with front cutting's manual.
Result
All insulation intact. 
No mechanical damage.
Securely fastened 
(not loose)
Correctly positioned
No abnormal vibrations.
No abnormal noise.

6.3 START-UP / OPERATION

For the following operations, see the 
relative instructions provided in the ride-on 
lawnmower with front cutting's manual.

6.4 AFTER USE

• Perform cleaning (par. 7.4).
• Check for any damage. If necessary, 
contact an authorised assistance centre.

7. ROUTINE MAINTENANCE

7.1

GENERAL INFORMATION

IMPORTANT The safety regulations to
be followed are described in chap. 2. Adhere
strictly to the indications provided to avoid
serious risks and/or hazards.
All service and all maintenance
checks must be carried out on a
stationary machine with the engine
switched off. Before cleaning or doing
maintenance work, take out the ignition
key and read the relevant instructions.
Wear suitable work wear, gloves
and safety glasses before proceeding
with maintenance operations.
• The frequencies and types of intervention 
are all indicated in the "Maintenance Tables". 
The table is designed to help you keep 
your machine in efficient and safe working 
order. It indicates the main operations to be 
performed and the frequency of the same. 
Perform the relative operation described 
based on the first deadline to arrive.
• The use of non-genuine spare parts and 
accessories could adversely affect machine 
operation and safety. The manufacturer 
shall decline all liability in the event of 
injuries or damages caused by such parts.
• Genuine spare parts are supplied by 
authorized assistance workshops and dealers.
IMPORTANT Any maintenance and
adjustment operations not described in
this manual must be carried out by your
Dealer or specialized service centre.
EN - 7

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

95 combi el qf

Tabla de contenido