Publicidad
Idiomas disponibles
Idiomas disponibles
Notes:
• If you press the 9 button once
while fast-forwarding or twice while
in stop mode, the recorder will stop
at the end of the file (F.Skip).
• If you press the 0 button once
while rewinding or twice while in
stop mode, the recorder will stop at
the beginning of the file (B.Skip). If
the 0 button is pressed within 2
seconds, the recorder skips to the
beginning of the previous file.
• If you press and hold the 9
button while fast forwarding (FF),
the recorder will continue to skip
forward.
• If you press and hold the 0
button while rewinding (REW),
the recorder will continue to skip
backward.
• The Cue and Review speed can be
set from [Speed1] to [Speed5]. Cue
and Review playback sound can be
set to [On] or [Off].
Erasing
Erasing files
1 Select the file you want to erase.
2 Press the ERASE button.
DICT
QP
Ni
MIKE
029
/ 031
Erase in Folder
File Erase
Cancel
3 Press the + button to select
[Erase in Folder] or [File
Erase].
[Erase in Folder]:
All files in a folder can be erased
simultaneously.
[File Erase]:
Erase one file.
4 Press the OK/MENU button.
DICT
QP
Ni
MIKE
E
029
/ 031
Erase in Folder
File Erase
Cancel
5 Press the + button to select
[Start], then press the OK/MENU
button.
• The display changes to [Erase !]
and erasing will start.
DICT
QP
Ni
DICT
MIKE
MIKE
E
029
/ 031
Erase Done
File Erase
Start
Cancel
BACK
• [Erase Done] is displayed when
the file is erased. File numbers
will be reassigned automatically.
Notes:
• An erased file cannot be restored.
• The erasing process may take up to
10 seconds. Do not interrupt this
process or data may be damaged.
• Files cannot be erased in the
following cases.
− Files are locked.
− Files stored on a locked SD card.
Partially erasing a file
Any unnecessary part of a file can
be erased.
1 Playback the file you would like to
partially erase.
2 Press the ERASE button at the
point you want to start erasing.
• While playback continues, [Erase
Start] will appear on the display.
• If you press the F2 ( ) button,
playback will skip (F.Skip) to the
end of the file and then stop. That
will be set automatically as the
ending point of the partial erase.
• If you press the F1 ( ) button,
playback will skip back (B. Skip)
and restart from the partial erase
starting point.
Playback will continue until the
end of the file or until the partial
erase ending point is confirmed.
DICT
QP
Ni
DICT
MIKE
MIKE
134
134
/ 134
45
02
M
s
01
55
25
H
M
s
Erase start
INSERT
SPEED
INDEX
3 In the position you want to end
partial erase, press the ERASE
button again.
• The erase starting point (time)
set in step 2 and the ending
point (time) set in this step will
be displayed alternatively for 8
QP
Ni
seconds.
• If you let the playback continue
until the end of the file, or in
case of a Verbal comment before
it, that will be considered the
ending point of the partial erase.
DICT
QP
Ni
MIKE
134
/ 134
45
01
M
01
55
23
H
M
Start point
EXIT
4 Press the ERASE button to confirm
the erasure.
• The display changes to [Partial
erasing !] and erasing will start.
• When [Partial erase completed.]
appears on the display, partial
erase is complete.
Notes:
• If the ERASE button is not
pressed within 8 seconds after the
[Start point] and [End point] are
alternately displayed, the recorder
will revert to stop status.
• An erased file cannot be restored.
• The erasing process may take up to
10 seconds. Do not interrupt this
process or data may be damaged.
• Files cannot be partially erased in
the following cases.
− Files are locked.
− Partial erasing is not possible
on parts of files with a Verbal
comment on them.
− Files are inside a locked SD card.
QP
Ni
/ 134
45
02
M
s
01
55
23
H
M
s
EXIT
DICT
QP
Ni
MIKE
134
/ 134
01
30
32
H
M
s
s
01
55
23
s
H
M
s
End point
EXIT
11
Publicidad
